Tapware & Showers
Filter by brand
Brushed Nickel Brass Toilet Bidet
$107.00 incl. GST-Anti-explosion and anti-corrosion
-Australian Standard
-2 years warranty
Package Contents
-1x Square Brass Toilet Bidet Spray
-1x Shower Holder
-1x 1.2m Stainless steel Hose
Important usage reminder:
-After using the sprayer, turn off the mini water stop tap or angle valve to prevent pressure buildup, which could lead to leaks over time.
Brushed Nickel Cover Plate 60mm
$28.00 incl. GSTFit with LUCID PIN Series
-BU0125-2.ST
-BU0126-2.ST
Brushed Nickel Cover Plate 65mm
$28.00 incl. GSTFit with LUCID PIN Series
-BU0125-2.ST
-BU0126-2.ST
Brushed Nickel Freestanding Tap with Handheld Shower
$1,154.00 incl. GST-Made of durable solid brass
-Ceramic disc cartridge for smooth & long-lasting operation
-Bottom Cover Plate height: 48mm, Floor mounted
-Note: With embedded box, which should be installed before flooring
-Australian standard, WELS approved, WELS Star Rating: Not Star Rated, 6L/M, WELS Reg No:S17213
-10 Years Warranty & 1 Year Labor Warranty (For product purchased on or after 1st October 2021)
Packaged Content:
-1 x Brushed Nickel Handheld & Spout Mixer Tap Set
-Installation Fitting
Brushed Nickel Freestanding Tap with Handheld Shower
$923.00 incl. GST-Cold & hot water pipe separate interface
-Handle tactility is superior, sensitive and stable control of the water
-Ceramic disc cartridge for smooth & long-lasting operation
-With embedded box, which should be installed before flooring
WELS star rating: 3 star, 9L/M
WELS Reg No:S17212
-15 years warranty + 2 years labor warranty
Package Contents
-1x Freestanding Handheld & Spout Mixer Tap Set
-Fitting
Brushed Nickel Hand Towel
$42.00 incl. GST-Durable 304 Stainless Steel
-Advanced rust proofing aesthetic and well-designed
-Brushed nickel finish keeps your bathroom stylish
-Installation fittings. Conform to the AU Standard
-Easy to install
-5 Year Warranty
Brushed Nickel Heated Towel Rack 4 Bars
$369.00 incl. GST-Rated Voltage 220-240V; Power 40W
-Temperature of surface: 53-58 degrees,Takes around 18-22 minutes to reach full warmth
-Waterproof IP Rating: IP55 RATING
-Meet SAA certification
-Plug Side: Both Left and Right available
-Can be installed with exposed cord or concealed cord
-2 Years Warranty
Package Contents
-1 x Heated Towel Rack
-Fitting
Brushed Nickel Heated Towel Rack 4 Bars
$369.00 incl. GST-Rated Voltage 220-240V; Power 40W
-Temperature of surface: 53-58 degrees,Takes around 18-22 minutes to reach full warmth
-Waterproof IP Rating: IP55 RATING
-Meet SAA certification
-Plug Side: Both Left and Right available
-Can be installed with exposed cord or concealed cord
-2 Years Warranty
Package Contents
-1 x Heated Towel Rack
-Fitting
Brushed Nickel Heated Towel Rack 6 Bars
$507.00 incl. GST-Material: Stainless Steel
-Australian Approved and comply with AS/NZS 3350 electrical safety standards
-Dimension: 674x620x120mm
-Rated Voltage: 220-240V, Power: 70W
-Temperature of surface: 50-55 degrees, Takes around 18-22 minutes to reach full warmth
-Waterproof IP Rating: IP55 RATING, Plug Side: Both Left and Right available
-Can be installed with exposed cord or concealed cord
-To be installed by a qualified electrician. Use a damp, soft cloth to clean the warmer. No detergents or chemicals to be used.
-2 Years Warranty
Brushed Nickel Heated Towel Rack 6 Bars
$465.00 incl. GST-Material: Stainless Steel, PVD Coating
-6 Bars, Dimensions: 620x600x122mm
-Voltage: 220-240V, Power: 70 W
-Power line: 1.2m power cord to plug into a grounded 3-pin electrical outlet
-Takes around 18-22 minutes to reach full warmth
-Range of the temperature: 53℃-58℃, Constant temperature: 55℃
-With built-in waterproof on/off switch
-Plug Side: Power cable can be installed both left or right side (Top or Bottom)
-Can be installed with exposed cord or concealed cord, Can be installed upside down
-Waterproof IP Rating: IP55 RATING, Meets SAA certification
-2 years warranty
Package Contents:
-1 x Heated Towel Rack
-1 x Installation Manual
How to Choose Tapware and Showers
Check the mounting type, dimensions, water connections and pressure requirements before choosing a design. Compare finishes and any applicable WELS information across products used in the same room.
Helpful Tips Before Installation
Confirm rough-in measurements and compatibility with your basin, bath or shower space before walls are finished. A licensed plumber can check connections and installation requirements.